Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Viscosity Recommendation | 100 Saybold Universal Second |
| Special Features Assembly Code | 0 |
| RPM [Max] | 192 rpm |
| Pressure [Max] | 1350 psi |
| Port Location | Side Port |
| Flow Rate | 57 lpm |
| Bolt Circle Dia. | 4.19 in |
| Flange Orientation | Standard |
| Port Code | B |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Duty | Standard-Duty |
| Special Features Hardware Code | 00 |
| Brake Type | Hydraulic |
| Seal Options | Standard |
| Design Code | 9 |
| Mount Type | 2 Bolt |
| Series | H Series |
| Corrosion Resistant | No |
| Output Shaft Code | 01 |
| Port Type | NPTF |
| Motor Element | Gerotor |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Pilot Diameter | 3.25 in |
| Paint | Primer Low Gloss Black |
| Output Shaft Type | Straight |
| Intermittent Pressure [Max] | 124 bar |
| Recommended System Working Temperature [Min] | -30 °F |
| Recommended System Working Temperature [Max] | 180 °F |
| Seal Material | Buna-N |
| Paint Code | A |
| Case Drain | None |
| Torque | 351 Nm |
| Mounting Holes | 0.535 in |
| Splines | 0 |
| Displacement (in³/rev) | 17.9 |
| Flow [Max] | 15 gal/min |
| Port Size | 1/2-14 |
| Mounting Type Code | A |
| Mounting Hole Size | 0.54 in |
| Port Size & Location | 1/2 in NPTF Side |
| Case Drain Code | 0 |
| RPM [Min] | 192 rpm |
| Shaft Type | Straight w/ Woodruff Key |
| Inlet Pressure [Max] | 2500 psi |
| Motor Type | Spool Valve |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
| Displacement | 294 cm3/Rev |
| Material | Cast Iron |
| Rotation | Standard Rotation |
| Front Seal Kit If Available | 60540-000 |
| Weight | 14.4 LB |
