Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Output Shaft Type | Straight |
| Material | Cast Iron |
| Case Drain Code | 0 |
| Splines | 0 |
| Mounting Holes | 0.535 in |
| Intermittent Pressure [Max] | 103 bar |
| Duty | Standard-Duty |
| Front Seal Kit If Available | 60540-000 |
| Paint | Primer Low Gloss Black |
| Brake Type | Hydraulic |
| Special Features Assembly Code | 0 |
| Motor Element | Gerotor |
| Design Code | 9 |
| Recommended System Working Temperature [Max] | 180 °F |
| Port Size | 1/2-14 |
| Seal Material | Buna-N |
| Mount Type | 2 Bolt |
| Output Shaft Code | 01 |
| Pressure [Max] | 1250 psi |
| Port Type | NPTF |
| Series | H Series |
| Recommended System Working Temperature [Min] | -30 °F |
| Pilot Diameter | 3.25 in |
| Port Location | Side Port |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Port Code | B |
| RPM [Max] | 152 rpm |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Inlet Pressure [Max] | 2500 psi |
| Torque | 407 Nm |
| Mounting Hole Size | 0.54 in |
| Displacement | 370 cm3/Rev |
| Corrosion Resistant | No |
| Port Size & Location | 1/2 in NPTF Side |
| Bolt Circle Dia. | 4.187 in |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Mounting Type Code | A |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Shaft Type | Straight w/ Woodruff Key |
| RPM [Min] | 152 rpm |
| Case Drain | None |
| Flow [Max] | 15 gal/min |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 22.58 |
| Special Features Hardware Code | 00 |
| Flow Rate | 57 lpm |
| Paint Code | A |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Seal Options | Standard |
| Weight | 14.7 LB |
