Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Recommended System Working Temperature [Max] | 180 °F |
| Shaft Type | Straight w/ Woodruff Key |
| RPM [Min] | 152 rpm |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Port Type | NPTF |
| Displacement (in³/rev) | 22.58 |
| Seal Material | Buna-N |
| Pilot Diameter | 3.25 in |
| Front Seal Kit If Available | 60540-000 |
| Output Shaft Code | 01 |
| Port Size & Location | 1/2 in NPTF Side |
| Intermittent Pressure [Max] | 103 bar |
| Port Code | B |
| Flow Rate | 57 lpm |
| Motor Type | Spool Valve |
| RPM [Max] | 152 rpm |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Flange Orientation | Standard |
| Torque | 407 Nm |
| Case Drain | None |
| Recommended System Working Temperature [Min] | -30 °F |
| Duty | Standard-Duty |
| Output Shaft Type | Straight |
| Bolt Circle Dia. | 4.187 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Splines | 0 |
| Mounting Hole Size | 0.54 in |
| Seal Options | Standard |
| Brake Type | Hydraulic |
| Mounting Holes | 0.535 in |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Inlet Pressure [Max] | 2500 psi |
| Mount Type | 2 Bolt |
| Flow [Max] | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Pressure [Max] | 1250 psi |
| Case Drain Code | 0 |
| Motor Element | Gerotor |
| Paint Code | A |
| Rotation | Standard Rotation |
| Corrosion Resistant | No |
| Series | H Series |
| Port Size | 1/2-14 |
| Special Features Hardware Code | 00 |
| Paint | Primer Low Gloss Black |
| Displacement | 370 cm3/Rev |
| Special Features Assembly Code | 0 |
| Design Code | 9 |
| Mounting Type Code | A |
| Port Location | Side Port |
| Material | Cast Iron |
| Weight | 14.7 LB |
