Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Seal Material | Buna-N |
| Corrosion Resistant | No |
| Brake Type | Hydraulic |
| Pressure [Max] | 1800 psi |
| Output Shaft Code | 01 |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Mounting Holes | 0.535 in |
| Recommended System Working Temperature [Min] | -30 °F |
| Paint Code | J |
| Displacement (in³/rev) | 5.9 |
| Special Features Assembly Code | 0 |
| Splines | 0 |
| Design Code | 9 |
| Seal Options | Standard |
| Mounting Type Code | A |
| Motor Element | Gerotor |
| Output Shaft Type | Straight |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Case Drain | None |
| Special Features Hardware Code | 00 |
| Mounting Hole Size | 0.54 in |
| Rotation | Standard Rotation |
| Material | Cast Iron |
| Port Size & Location | SAE-10 Side |
| Flow [Max] | 15 gal/min |
| Mount Type | 2 Bolt |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Front Seal Kit If Available | 60540-000 |
| Bolt Circle Dia. | 4.19 in |
| Intermittent Pressure [Max] | 165 bar |
| Paint | Low Gloss Black 2 Mils Min Thick |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Recommended System Working Temperature [Max] | 180 °F |
| Port Code | A |
| RPM [Min] | 585 rpm |
| Port Size | 7/8-14 |
| RPM [Max] | 585 rpm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Location | Side Port |
| Torque | 155 Nm |
| Displacement | 96 cm3/Rev |
| Shaft Type | Straight w/ Woodruff Key |
| Case Drain Code | 0 |
| Port Type | SAE O-Ring |
| Flange Orientation | Standard |
| Pilot Diameter | 3.25 in |
| Series | H Series |
| Duty | Standard-Duty |
| Flow Rate | 57 lpm |
| Weight | 12.25 LB |
