Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Case Drain | None |
| Case Drain Code | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Paint | Low Gloss Black 2 Mils Min Thick |
| Output Shaft Type | Straight |
| Seal Options | Standard |
| Rotation | Standard Rotation |
| Port Size & Location | SAE-10 Side |
| Mounting Type Code | A |
| Torque | 155 Nm |
| Port Location | Side Port |
| Displacement (in³/rev) | 5.9 |
| Pressure [Max] | 1800 psi |
| Material | Cast Iron |
| Splines | 0 |
| Front Seal Kit If Available | 60540-000 |
| Port Type | SAE O-Ring |
| Paint Code | J |
| Mount Type | 2 Bolt |
| Flow Rate | 57 lpm |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Special Features Assembly Code | 0 |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Output Shaft Code | 01 |
| Motor Type | Spool Valve |
| RPM [Max] | 585 rpm |
| Flange Orientation | Standard |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Intermittent Pressure [Max] | 165 bar |
| Port Size | 7/8-14 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Pilot Diameter | 3.25 in |
| Duty | Standard-Duty |
| Port Code | A |
| Shaft Type | Straight w/ Woodruff Key |
| Series | H Series |
| Flow [Max] | 15 gal/min |
| Design Code | 9 |
| Seal Material | Buna-N |
| Mounting Hole Size | 0.54 in |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Bolt Circle Dia. | 4.19 in |
| Special Features Hardware Code | 00 |
| Recommended System Working Temperature [Max] | 180 °F |
| Displacement | 96 cm3/Rev |
| Recommended System Working Temperature [Min] | -30 °F |
| Mounting Holes | 0.535 in |
| RPM [Min] | 585 rpm |
| Brake Type | Hydraulic |
| Weight | 12.25 LB |
