Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Mount Type | 2 Bolt |
| Flange Orientation | Standard |
| Bolt Circle Dia. | 4.19 in |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Flow [Max] | 15 gal/min |
| Brake Type | Hydraulic |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Displacement | 231 cm3/Rev |
| Port Location | Side Port |
| Recommended System Working Temperature [Min] | -30 °F |
| Port Size & Location | SAE-10 Side |
| Case Drain Code | 0 |
| Material | Cast Iron |
| Case Drain | None |
| Motor Type | Spool Valve |
| Duty | Standard-Duty |
| Mounting Holes | 0.535 in |
| Paint | Primer Low Gloss Black |
| Design Code | 9 |
| Recommended System Working Temperature [Max] | 180 °F |
| Special Features Hardware Code | 00 |
| Torque | 302 Nm |
| Series | H Series |
| Intermittent Pressure [Max] | 138 bar |
| Pressure [Max] | 1450 psi |
| RPM [Max] | 243 rpm |
| Port Type | SAE O-Ring |
| Splines | 0 |
| Displacement (in³/rev) | 14.1 |
| Front Seal Kit If Available | 60540-000 |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Hole Size | 0.54 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Corrosion Resistant | No |
| Port Size | 7/8-14 |
| RPM [Min] | 243 rpm |
| Rotation | Standard Rotation |
| Output Shaft Code | 01 |
| Paint Code | A |
| Port Code | A |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Pilot Diameter | 3.25 in |
| Seal Options | Standard |
| Mounting Type Code | A |
| Motor Element | Gerotor |
| Seal Material | Buna-N |
| Flow Rate | 57 lpm |
| Output Shaft Type | Straight |
| Output Torque at Rated PSI (inch/pounds) | 2672.92 in lb |
| Special Features Assembly Code | 0 |
| Weight | 13.3 LB |
