Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Paint | Primer Low Gloss Black |
| Flange Orientation | Standard |
| Port Size | 1/2-14 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Torque at Rated PSI (inch/pounds) | 194.72 in lb |
| Series | H Series |
| Corrosion Resistant | No |
| Port Type | NPTF |
| Bolt Circle Dia. | 4.19 in |
| Splines | 6 |
| Special Features Assembly Code | 0 |
| Displacement (in³/rev) | 22.6 |
| Mounting Hole Size | 0.54 in |
| Port Size & Location | 1/2 in NPTF Side |
| Output Shaft Code | 02 |
| Case Drain Code | 0 |
| Port Code | B |
| Inlet Pressure [Max] | 2500 psi |
| Seal Material | Buna-N |
| Shaft Size & Type | 1 in - 6T Spline |
| Rotation | Standard Rotation |
| Intermittent Pressure [Max] | 103 bar |
| RPM [Min] | 152 rpm |
| Duty | Standard-Duty |
| Mount Type | 2 Bolt |
| Flow [Max] | 15 gal/min |
| RPM [Max] | 152 rpm |
| Displacement | 370 cm3/Rev |
| Pilot Diameter | 3.25 in |
| Motor Element | Gerotor |
| Port Location | Side Port |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Mounting Holes | 0.535 in |
| Motor Type | Spool Valve |
| Flow Rate | 57 lpm |
| Mounting Type Code | A |
| Shaft Type | Splined |
| Case Drain | None |
| Special Features | None |
| Pressure [Max] | 1250 psi |
| Material | Cast Iron |
| Paint Code | A |
| Special Features Hardware Code | 00 |
| Torque | 407 Nm |
| Weight | 14.7 LB |
