Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Series | H Series |
| Pressure [Max] | 1250 psi |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Flow Rate | 57 lpm |
| Mount Type | 2 Bolt |
| Paint | Primer Low Gloss Black |
| Output Torque at Rated PSI (inch/pounds) | 194.72 in lb |
| Seal Material | Buna-N |
| Mounting Type Code | A |
| RPM [Min] | 152 rpm |
| Motor Type | Spool Valve |
| Special Features Assembly Code | 0 |
| Port Code | B |
| Torque | 407 Nm |
| Special Features Hardware Code | 00 |
| Shaft Size & Type | 1 in - 6T Spline |
| Mounting Hole Size | 0.54 in |
| Rotation | Standard Rotation |
| Pilot Diameter | 3.25 in |
| Port Size | 1/2-14 |
| Case Drain | None |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Shaft Code | 02 |
| RPM [Max] | 152 rpm |
| Intermittent Pressure [Max] | 103 bar |
| Mounting Holes | 0.535 in |
| Case Drain Code | 0 |
| Special Features | None |
| Displacement | 370 cm3/Rev |
| Paint Code | A |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| Flow [Max] | 15 gal/min |
| Displacement (in³/rev) | 22.6 |
| Material | Cast Iron |
| Port Type | NPTF |
| Motor Element | Gerotor |
| Duty | Standard-Duty |
| Flange Orientation | Standard |
| Splines | 6 |
| Shaft Type | Splined |
| Corrosion Resistant | No |
| Bolt Circle Dia. | 4.19 in |
| Port Size & Location | 1/2 in NPTF Side |
| Weight | 14.7 LB |
