Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Output Shaft Type | Straight |
| Flow Rate | 45 lpm |
| Rotation | Standard Rotation |
| Seal Material | Buna-N |
| Case Drain Code | 1 |
| Flange Orientation | Standard |
| Intermittent Pressure [Max] | 165 bar |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Bolt Circle Dia. | 4.19 in |
| Paint | Primer Low Gloss Black |
| Output Shaft Code | 01 |
| Motor Type | Spool Valve |
| RPM [Max] | 969 rpm |
| Flow [Max] | 12 gal/min |
| Special Features Hardware Code | 00 |
| Series | H Series |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Special Features Assembly Code | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size & Location | SAE-10 Side |
| Splines | 0 |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 2.8 |
| Displacement | 46 cm3/Rev |
| Duty | Standard-Duty |
| Material | Cast Iron |
| Front Seal Kit If Available | 60540-000 |
| Brake Type | Hydraulic |
| Recommended System Working Temperature [Max] | 180 °F |
| Mounting Hole Size | 0.54 in |
| Pilot Diameter | 3.25 in |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Torque | 73 Nm |
| Inlet Pressure [Max] | 2500 psi |
| Pressure [Max] | 1800 psi |
| Mount Type | 2 Bolt |
| Port Type | SAE O-Ring |
| Shaft Type | Straight w/ Woodruff Key |
| Seal Options | Standard |
| Corrosion Resistant | No |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Paint Code | A |
| Port Location | Side Port |
| RPM [Min] | 969 rpm |
| Recommended System Working Temperature [Min] | -30 °F |
| Design Code | 9 |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Port Size | 7/8-14 |
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Port Code | A |
| Weight | 13.0 LB |
