Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
| Motor Type | Spool Valve |
| Intermittent Pressure [Max] | 165 bar |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 0.54 in |
| Torque | 73 Nm |
| Case Drain Code | 0 |
| Port Size | 7/8-14 |
| Pressure [Max] | 1800 psi |
| Paint Code | A |
| Mounting Holes | 0.535 in |
| Seal Material | Buna-N |
| Material | Cast Iron |
| Port Location | Side Port |
| RPM [Max] | 969 rpm |
| Flow [Max] | 12 gal/min |
| Flange Orientation | Flange Rotated 90° |
| Port Code | A |
| Mounting Type Code | A |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Series | H Series |
| Motor Element | Gerotor |
| Port Size & Location | SAE-10 Side |
| Rotation | Flange |
| Splines | 0 |
| Case Drain | None |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Displacement (in³/rev) | 2.8 |
| Special Features | Flange Rotated 90° |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Port Type | SAE O-Ring |
| Duty | Standard-Duty |
| Mount Type | 2 Bolt |
| Paint | Primer Low Gloss Black |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 2 |
| Output Shaft Code | 01 |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Special Features Hardware Code | 00 |
| Displacement | 46 cm3/Rev |
| Shaft Type | Straight w/ Woodruff Key |
| Corrosion Resistant | No |
| Bolt Circle Dia. | 4.19 in |
| Flow Rate | 45 lpm |
| RPM [Min] | 969 rpm |
| Weight | 13.0 LB |
