Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
| Seal Material | Buna-N |
| Port Code | A |
| RPM [Max] | 969 rpm |
| Mounting Type Code | A |
| Special Features Hardware Code | 00 |
| Intermittent Pressure [Max] | 165 bar |
| Corrosion Resistant | No |
| Special Features | Flange Rotated 90° |
| Displacement | 46 cm3/Rev |
| Rotation | Flange |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Bolt Circle Dia. | 4.19 in |
| Case Drain Code | 0 |
| Port Type | SAE O-Ring |
| Material | Cast Iron |
| Displacement (in³/rev) | 2.8 |
| Mounting Holes | 0.535 in |
| Series | H Series |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| Port Size & Location | SAE-10 Side |
| Mounting Hole Size | 0.54 in |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Motor Element | Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Flange Rotated 90° |
| Mount Type | 2 Bolt |
| Port Size | 7/8-14 |
| Pilot Diameter | 3.25 in |
| Flow [Max] | 12 gal/min |
| Duty | Standard-Duty |
| RPM [Min] | 969 rpm |
| Torque | 73 Nm |
| Splines | 0 |
| Paint Code | A |
| Output Shaft Code | 01 |
| Flow Rate | 45 lpm |
| Special Features Assembly Code | 2 |
| Motor Type | Spool Valve |
| Port Location | Side Port |
| Case Drain | None |
| Paint | Primer Low Gloss Black |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pressure [Max] | 1800 psi |
| Weight | 13.0 LB |
