Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Bolt Circle Dia. | 4.19 in |
| Case Drain | None |
| Recommended System Working Temperature [Max] | 180 °F |
| Motor Element | Gerotor |
| Flow Rate | 57 lpm |
| Paint Code | A |
| Front Seal Kit If Available | 60540-000 |
| Pilot Diameter | 3.25 in |
| Duty | Standard-Duty |
| Port Type | SAE O-Ring |
| Flow [Max] | 15 gal/min |
| Output Shaft Type | Straight |
| Seal Material | Buna-N |
| Flange Orientation | Standard |
| Port Size & Location | SAE-10 Side |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Rotation | Standard Rotation |
| Brake Type | Hydraulic |
| Displacement (in³/rev) | 9.7 |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Intermittent Pressure [Max] | 155 bar |
| Mount Type | 2 Bolt |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Corrosion Resistant | No |
| Seal Options | Standard |
| Design Code | 9 |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain Code | 0 |
| Series | H Series |
| Motor Type | Spool Valve |
| Port Size | 7/8-14 |
| Special Features Assembly Code | 0 |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Material | Cast Iron |
| Displacement | 159 cm3/Rev |
| Shaft Size & Type | 1 in Straight, w/ Cross Hole |
| Recommended System Working Temperature [Min] | -30 °F |
| Shaft Type | Straight w/ Cross Hole |
| Pressure [Max] | 1650 psi |
| Paint | Primer Low Gloss Black |
| Special Features Hardware Code | 00 |
| Splines | 0 |
| RPM [Min] | 353 rpm |
| Mounting Hole Size | 0.54 in |
| Port Location | Side Port |
| RPM [Max] | 353 rpm |
| Output Shaft Code | 08 |
| Port Code | A |
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Torque | 233 Nm |
| Weight | 12.5 LB |
