Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Special Features Hardware Code | AA |
| Recommended System Working Temperature [Min] | -30 °F |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Paint Code | A |
| Motor Element | Gerotor |
| Case Drain | None |
| Special Features | Free Running Gerotor |
| Case Drain Code | 0 |
| Pressure [Max] | 1800 psi |
| Output Shaft Code | 01 |
| Series | H Series |
| RPM [Min] | 1021 rpm |
| Flow Rate | 38 lpm |
| Duty | Standard-Duty |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Holes | 0.535 in |
| Brake Type | Hydraulic |
| Output Shaft Type | Straight |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Displacement (in³/rev) | 2.2 |
| Port Type | NPTF |
| Material | Cast Iron |
| Mounting Hole Size | 0.54 in |
| Torque | 56 Nm |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Mounting Type Code | A |
| Geroter/Geroler Options | Free Running |
| Seal Options | Standard |
| Port Size & Location | 1/2 in NPTF Side |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 0 |
| Port Code | B |
| Mount Type | 2 Bolt |
| Port Size | 1/2-14 |
| Corrosion Resistant | No |
| Front Seal Kit If Available | 60540-000 |
| Port Location | Side Port |
| Rotation | Standard Rotation |
| Paint | Primer Low Gloss Black |
| Intermittent Pressure [Max] | 165 bar |
| RPM [Max] | 1021 rpm |
| Bolt Circle Dia. | 4.19 in |
| Displacement | 36 cm3/Rev |
| Flow [Max] | 10 gal/min |
| Special Features Assembly Code | 0 |
| Seal Material | Buna-N |
| Motor Type | Spool Valve |
| Pilot Diameter | 3.25 in |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Design Code | 9 |
| Flange Orientation | Standard |
| Recommended System Working Temperature [Max] | 180 °F |
| Geroler Options | Free Running |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Weight | 11.6 LB |
