Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Port Size & Location | 1/2 in NPTF Side |
| Case Drain | None |
| Design Code | 9 |
| Front Seal Kit If Available | 60540-000 |
| Flow Rate | 38 lpm |
| Geroter/Geroler Options | Free Running |
| Case Drain Code | 0 |
| Special Features | Free Running Gerotor |
| RPM [Max] | 1021 rpm |
| Output Shaft Type | Straight |
| Port Location | Side Port |
| Pilot Diameter | 3.25 in |
| Motor Element | Gerotor |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 4.19 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Type | NPTF |
| Duty | Standard-Duty |
| Seal Material | Buna-N |
| Special Features Assembly Code | 0 |
| Paint | Primer Low Gloss Black |
| Pressure [Max] | 1800 psi |
| Mounting Holes | 0.535 in |
| Recommended System Working Temperature [Min] | -30 °F |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Geroler Options | Free Running |
| Series | H Series |
| Intermittent Pressure [Max] | 165 bar |
| Port Code | B |
| Port Size | 1/2-14 |
| Material | Cast Iron |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Torque | 56 Nm |
| Flow [Max] | 10 gal/min |
| Paint Code | A |
| Brake Type | Hydraulic |
| Mounting Type Code | A |
| Displacement | 36 cm3/Rev |
| Output Shaft Code | 01 |
| Inlet Pressure [Max] | 2500 psi |
| Recommended System Working Temperature [Max] | 180 °F |
| Mount Type | 2 Bolt |
| Mounting Hole Size | 0.54 in |
| Shaft Type | Straight w/ Woodruff Key |
| Displacement (in³/rev) | 2.2 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flange Orientation | Standard |
| Seal Options | Standard |
| Splines | 0 |
| RPM [Min] | 1021 rpm |
| Rotation | Standard Rotation |
| Special Features Hardware Code | AA |
| Corrosion Resistant | No |
| Weight | 11.6 LB |
