Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Paint Code | A |
| Mounting Holes | 3/8-16 |
| Recommended System Working Temperature [Min] | -30 °F |
| Bolt Circle Dia. | 3 1/4 in |
| Seal Options | Standard |
| Special Features Hardware Code | AA |
| Corrosion Resistant | No |
| Geroter/Geroler Options | Free Running |
| Case Drain Code | 0 |
| Output Shaft Code | 01 |
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| Brake Type | Hydraulic |
| RPM [Min] | 1021 rpm |
| Flange Orientation | Standard |
| Material | Cast Iron |
| Recommended System Working Temperature [Max] | 180 °F |
| Inlet Pressure [Max] | 2500 psi |
| Mount Type | 4 Bolt |
| Special Features | Free Running Gerotor |
| Output Shaft Type | Straight |
| Duty | Standard-Duty |
| Seal Material | Buna-N |
| Geroler Options | Free Running |
| Series | H Series |
| Flow [Max] | 10 gal/min |
| Mounting Type Code | B |
| Special Features Assembly Code | 0 |
| Port Location | Side Port |
| RPM [Max] | 1021 rpm |
| Rotation | Standard Rotation |
| Front Seal Kit If Available | 60540-000 |
| Displacement | 36 cm3/Rev |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Torque | 56 Nm |
| Port Size & Location | SAE-10 Side |
| Paint | Primer Low Gloss Black |
| Displacement (in³/rev) | 2.2 |
| Intermittent Pressure [Max] | 165 bar |
| Pilot Diameter | 1.75 in |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Flow Rate | 38 lpm |
| Motor Type | Spool Valve |
| Design Code | 9 |
| Splines | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pressure [Max] | 1800 psi |
| Port Size | 7/8-14 |
| Case Drain | None |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Port Type | SAE O-Ring |
| Port Code | A |
| Motor Element | Gerotor |
| Shaft Type | Straight w/ Woodruff Key |
| Weight | 11.2 LB |
