Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Inlet Pressure [Max] | 2500 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Case Drain | None |
| Flow Rate | 38 lpm |
| Port Size & Location | 1/2 in NPTF Side |
| Material | Cast Iron |
| Port Location | Side Port |
| Recommended System Working Temperature [Max] | 180 °F |
| Mount Type | 4 Bolt |
| Port Code | B |
| Front Seal Kit If Available | 60540-000 |
| Output Shaft Code | 01 |
| Displacement | 36 cm3/Rev |
| Geroler Options | Free Running |
| Displacement (in³/rev) | 2.2 |
| Shaft Type | Straight w/ Woodruff Key |
| Flange Orientation | Standard |
| Splines | 0 |
| Brake Type | Hydraulic |
| Case Drain Code | 0 |
| Series | H Series |
| Special Features Hardware Code | AA |
| Output Shaft Type | Straight |
| Mounting Holes | 3/8-16 |
| Flow [Max] | 10 gal/min |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Port Type | NPTF |
| Corrosion Resistant | No |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pilot Diameter | 1.75 in |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Port Size | 1/2-14 |
| Duty | Standard-Duty |
| RPM [Max] | 1021 rpm |
| RPM [Min] | 1021 rpm |
| Seal Material | Buna-N |
| Mounting Type Code | B |
| Rotation | Standard Rotation |
| Motor Element | Gerotor |
| Intermittent Pressure [Max] | 165 bar |
| Design Code | 9 |
| Paint | Primer Low Gloss Black |
| Geroter/Geroler Options | Free Running |
| Recommended System Working Temperature [Min] | -30 °F |
| Bolt Circle Dia. | 3 1/4 in |
| Seal Options | Standard |
| Special Features Assembly Code | 0 |
| Pressure [Max] | 1800 psi |
| Paint Code | A |
| Torque | 56 Nm |
| Special Features | Free Running Gerotor |
| Motor Type | Spool Valve |
| Weight | 11.2 LB |
