Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Shaft Type | Straight w/ Woodruff Key |
| Output Shaft Code | 01 |
| Corrosion Resistant | No |
| Paint | Primer Low Gloss Black |
| Port Type | NPTF |
| Port Location | Side Port |
| Seal Options | Standard |
| Motor Type | Spool Valve |
| Special Features | Free Running Gerotor |
| Port Size & Location | 1/2 in NPTF Side |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Displacement (in³/rev) | 2.2 |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Series | H Series |
| Pilot Diameter | 1.75 in |
| RPM [Min] | 1021 rpm |
| Mounting Type Code | B |
| RPM [Max] | 1021 rpm |
| Rotation | Standard Rotation |
| Geroler Options | Free Running |
| Design Code | 9 |
| Mounting Holes | 3/8-16 |
| Recommended System Working Temperature [Min] | -30 °F |
| Flange Orientation | Standard |
| Intermittent Pressure [Max] | 165 bar |
| Seal Material | Buna-N |
| Special Features Hardware Code | AA |
| Mount Type | 4 Bolt |
| Case Drain Code | 0 |
| Case Drain | None |
| Port Code | B |
| Paint Code | A |
| Displacement | 36 cm3/Rev |
| Special Features Assembly Code | 0 |
| Flow [Max] | 10 gal/min |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Torque | 56 Nm |
| Brake Type | Hydraulic |
| Splines | 0 |
| Duty | Standard-Duty |
| Bolt Circle Dia. | 3 1/4 in |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Flow Rate | 38 lpm |
| Front Seal Kit If Available | 60540-000 |
| Port Size | 1/2-14 |
| Recommended System Working Temperature [Max] | 180 °F |
| Geroter/Geroler Options | Free Running |
| Motor Element | Gerotor |
| Pressure [Max] | 1800 psi |
| Output Shaft Type | Straight |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Weight | 11.2 LB |
