Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 4 Bolt Mount
- Straight Output Shaft
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Port Code | C |
| Splines | 0 |
| Motor Type | Spool Valve |
| RPM [Max] | 953 rpm |
| Mount Type | 4 Bolt |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Type | Straight w/ Woodruff Key |
| Paint | Primer Low Gloss Black |
| Corrosion Resistant | No |
| Port Type | Manifold, O-Ring |
| Pressure [Max] | 1800 psi |
| Port Location | Side Port |
| Case Drain | None |
| Seal Material | Buna-N |
| Special Features Assembly Code | 0 |
| Bolt Circle Dia. | 3 1/4 in |
| Displacement | 58 cm3/Rev |
| RPM [Min] | 953 rpm |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Mounting Holes | 3/8-16 |
| Flow [Max] | 15 gal/min |
| Geroter/Geroler Options | Free Running |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Case Drain Code | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Rotation | Standard Rotation |
| Output Torque at Rated PSI (inch/pounds) | 805.42 in lb |
| Output Shaft Code | 01 |
| Flow Rate | 57 lpm |
| Material | Cast Iron |
| Special Features Hardware Code | AA |
| Mounting Type Code | B |
| Pilot Diameter | 1.75 in |
| Duty | Standard-Duty |
| Intermittent Pressure [Max] | 165 bar |
| Series | H Series |
| Flange Orientation | Standard |
| Inlet Pressure [Max] | 2500 psi |
| Paint Code | A |
| Displacement (in³/rev) | 3.5 |
| Special Features | Free Running Gerotor |
| Motor Element | Gerotor |
| Torque | 91 Nm |
| Weight | 11.5 LB |
