Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 4 Bolt Mount
- Straight Output Shaft
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Mount Type | 4 Bolt |
| Geroter/Geroler Options | Free Running |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Duty | Standard-Duty |
| Output Torque at Rated PSI (inch/pounds) | 805.42 in lb |
| Case Drain | None |
| Material | Cast Iron |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Splines | 0 |
| RPM [Max] | 953 rpm |
| Flange Orientation | Standard |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Inlet Pressure [Max] | 2500 psi |
| Torque | 91 Nm |
| Displacement | 58 cm3/Rev |
| Special Features | Free Running Gerotor |
| Rotation | Standard Rotation |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Holes | 3/8-16 |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Paint | Primer Low Gloss Black |
| Case Drain Code | 0 |
| RPM [Min] | 953 rpm |
| Special Features Hardware Code | AA |
| Series | H Series |
| Displacement (in³/rev) | 3.5 |
| Output Shaft Code | 01 |
| Motor Type | Spool Valve |
| Special Features Assembly Code | 0 |
| Flow Rate | 57 lpm |
| Intermittent Pressure [Max] | 165 bar |
| Port Code | C |
| Corrosion Resistant | No |
| Bolt Circle Dia. | 3 1/4 in |
| Pressure [Max] | 1800 psi |
| Port Type | Manifold, O-Ring |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| Pilot Diameter | 1.75 in |
| Mounting Type Code | B |
| Paint Code | A |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Location | Side Port |
| Flow [Max] | 15 gal/min |
| Weight | 11.5 LB |
