Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 16 Tooth
- 1/2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Bore Size [Max] | 1.125 in |
| Bore Range [Min] | 0.5 in |
| Bore Type | Rough Bore |
| Construction Internal | Solid |
| Bushing Type | None |
| No. of Teeth | 16 |
| Type | DF-1 |
| Belt Pitch | 3/8 in |
| Finished Bore | N/A |
| Flange O.D. | 2.155 in |
| Bushing Bore Size [Min] | 0.5 in |
| Bore Size [Max] | 1.125 in |
| Bore Range [Max] | 1.125 in |
| Material | Steel |
| Material External Use | Steel |
| Set Screw Size | 1/4-20 x 1/4 |
| Bushing Series | N/A |
| Material Internal Use | Atomized Metals |
| Belt Width | 0.5 in |
| Pitch Dia. | 1.91 in |
| Bore Size [Min] | 0.5 in |
| Pitch Diameter | 1.91 in |
| Belt Size | L |
| Outside Dia. | 1.88 in |
| Hardened Teeth | Without Hardened Teeth |
| Hub Projection | 5/8 in |
| Hub Type | B |
| No. of Screws | 1 |
| Teeth Face Width | 0.75 in |
| Length Through Bore | 1.375 in |
| Hub Dia. | 1.437 in |
| Weight | 0.6 LB |
| EAN or UPC | 697950101002 |
