Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 16 Tooth
- 1/2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Pitch | 3/8 in |
| Hub Type | B |
| Hardened Teeth | Without Hardened Teeth |
| Flange O.D. | 2.155 in |
| Material Internal Use | Atomized Metals |
| Set Screw Size | 1/4-20 x 1/4 |
| Bushing Type | None |
| Bushing Bore Size [Max] | 1.125 in |
| No. of Screws | 1 |
| Material | Steel |
| Bushing Series | N/A |
| Construction Internal | Solid |
| Pitch Dia. | 1.91 in |
| Pitch Diameter | 1.91 in |
| Belt Width | 0.5 in |
| Material External Use | Steel |
| Bore Type | Rough Bore |
| Finished Bore | N/A |
| Bore Size [Min] | 0.5 in |
| No. of Teeth | 16 |
| Hub Dia. | 1.437 in |
| Type | DF-1 |
| Bushing Bore Size [Min] | 0.5 in |
| Bore Size [Max] | 1.125 in |
| Outside Dia. | 1.88 in |
| Belt Size | L |
| Bore Range [Min] | 0.5 in |
| Length Through Bore | 1.375 in |
| Bore Range [Max] | 1.125 in |
| Hub Projection | 5/8 in |
| Teeth Face Width | 0.75 in |
| Weight | 0.6 LB |
| EAN or UPC | 697950101002 |
