Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 17 Tooth
- 1/2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Outside Dia. | 1.999 in |
| Hardened Teeth | Without Hardened Teeth |
| Hub Projection | 5/8 in |
| Length Through Bore | 1.25 in |
| Bushing Bore Size [Min] | 0.5 in |
| Flange O.D. | 2.256 in |
| No. of Teeth | 17 |
| Pitch Dia. | 2.029 in |
| Belt Pitch | 3/8 in |
| Teeth Face Width | 0.75 in |
| Hub Type | B |
| Material | Steel |
| Bore Type | Rough Bore |
| Bushing Bore Size [Max] | 1.125 in |
| Hub Dia. | 1.437 in |
| Belt Width | 0.5 in |
| Bushing Type | None |
| Bushing Series | N/A |
| Belt Size | L |
| Pitch Diameter | 2.029 in |
| Bore Range [Min] | 0.5 in |
| Bore Size [Max] | 1.125 in |
| Finished Bore | N/A |
| Type | DF-1 |
| Bore Range [Max] | 1.125 in |
| Bore Size [Min] | 0.5 in |
| Material Internal Use | Atomized Metals |
| Construction Internal | Solid |
| Material External Use | Steel |
| Weight | 0.65 LB |
| EAN or UPC | 697950151038 |
