Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 17 Tooth
- 1/2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Teeth | 17 |
| Hub Projection | 5/8 in |
| Belt Width | 0.5 in |
| Material External Use | Steel |
| Pitch Dia. | 2.029 in |
| Bore Type | Rough Bore |
| Bushing Series | N/A |
| Bushing Type | None |
| Bore Range [Max] | 1.125 in |
| Pitch Diameter | 2.029 in |
| Finished Bore | N/A |
| Length Through Bore | 1.25 in |
| Belt Size | L |
| Outside Dia. | 1.999 in |
| Flange O.D. | 2.256 in |
| Material | Steel |
| Bore Range [Min] | 0.5 in |
| Hub Type | B |
| Belt Pitch | 3/8 in |
| Material Internal Use | Atomized Metals |
| Bore Size [Min] | 0.5 in |
| Teeth Face Width | 0.75 in |
| Type | DF-1 |
| Bushing Bore Size [Max] | 1.125 in |
| Bushing Bore Size [Min] | 0.5 in |
| Hub Dia. | 1.437 in |
| Hardened Teeth | Without Hardened Teeth |
| Bore Size [Max] | 1.125 in |
| Construction Internal | Solid |
| Weight | 0.65 LB |
| EAN or UPC | 697950151038 |
