Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 60 Tooth
- 3 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material | Cast Iron |
| Bore Range [Min] | 0.5 in |
| Finished Bore | N/A |
| Bushing Type | QD |
| Outside Dia. | 9.498 in |
| Material Internal Use | Cast Iron |
| Hub Dia. | 6 3/8 in |
| Teeth Face Width | 3.375 in |
| Bore Size [Max] | 2.938 in |
| Pitch Diameter | 9.549 in |
| No. of Teeth | 60 |
| Bushing Bore Size [Min] | 0.5 in |
| Belt Size | H |
| Belt Width | 3 in |
| Pitch Dia. | 9.549 in |
| Bore Type | Bushed |
| Bushing Bore Size [Max] | 2.938 in |
| Length Through Bore | 1.25 in |
| Belt Pitch | 1/2 in |
| Material External Use | Cast Iron |
| Bore Range [Max] | 2.9375 in |
| Hardened Teeth | With Hardened Teeth |
| Construction Internal | Web |
| Bore Size [Min] | 0.5 in |
| Type | J-2 |
| Bushing Series | SF |
| Hub Type | A |
| Weight | 24.26 LB |
| EAN or UPC | 697950152387 |
