Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 60 Tooth
- 3 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material | Cast Iron |
| Bushing Type | QD |
| Finished Bore | N/A |
| Outside Dia. | 9.498 in |
| Hub Dia. | 6 3/8 in |
| Type | J-2 |
| Belt Pitch | 1/2 in |
| Bore Range [Min] | 0.5 in |
| Bushing Bore Size [Min] | 0.5 in |
| Teeth Face Width | 3.375 in |
| Belt Size | H |
| Pitch Diameter | 9.549 in |
| Pitch Dia. | 9.549 in |
| Bore Type | Bushed |
| Belt Width | 3 in |
| Construction Internal | Web |
| Bore Range [Max] | 2.9375 in |
| Bore Size [Max] | 2.938 in |
| Hardened Teeth | With Hardened Teeth |
| Hub Type | A |
| Bushing Series | SF |
| Material Internal Use | Cast Iron |
| Length Through Bore | 1.25 in |
| No. of Teeth | 60 |
| Bore Size [Min] | 0.5 in |
| Material External Use | Cast Iron |
| Bushing Bore Size [Max] | 2.938 in |
| Weight | 24.26 LB |
| EAN or UPC | 697950152387 |
