Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 16 Tooth
- 3 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Size [Max] | 1 in |
| Outside Dia. | 2.492 in |
| Belt Pitch | 1/2 in |
| Material | Steel |
| Bushing Type | Taper-Lock |
| Bushing Series | 1008 |
| Teeth Face Width | 2.344 in |
| Hub Type | A |
| Bore Range [Max] | 1 in |
| Material Internal Use | Atomized Metals |
| Construction Internal | Solid |
| Width Across Teeth | 2.093 in |
| Pitch Diameter | 2.546 in |
| Pitch Dia. | 2.546 in |
| Type | KF-1 |
| Bushing Bore Size [Max] | 1 in |
| Bushing Bore Size [Min] | 0.5 in |
| Material External Use | Steel |
| Bore Type | Bushed |
| Belt Size | H |
| Flange O.D. | 2.779 in |
| Belt Width | 2 in |
| Bore Size [Min] | 0.5 in |
| Length Through Bore | 0.875 in |
| Bore Range [Min] | 0.5 in |
| Hub Projection | 3/4 in |
| No. of Teeth | 16 |
| Finished Bore | N/A |
| Weight | 1.9 LB |
| EAN or UPC | 697950083148 |
