Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 16 Tooth
- 3 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Outside Dia. | 2.492 in |
| Hub Type | A |
| Flange O.D. | 2.779 in |
| Length Through Bore | 0.875 in |
| Bore Range [Max] | 1 in |
| Bushing Series | 1008 |
| Teeth Face Width | 2.344 in |
| Hub Projection | 3/4 in |
| Bushing Type | Taper-Lock |
| Bushing Bore Size [Min] | 0.5 in |
| Material | Steel |
| Bore Range [Min] | 0.5 in |
| Bore Type | Bushed |
| Material Internal Use | Atomized Metals |
| Bushing Bore Size [Max] | 1 in |
| Material External Use | Steel |
| Bore Size [Max] | 1 in |
| Construction Internal | Solid |
| Type | KF-1 |
| No. of Teeth | 16 |
| Belt Size | H |
| Width Across Teeth | 2.093 in |
| Pitch Dia. | 2.546 in |
| Bore Size [Min] | 0.5 in |
| Pitch Diameter | 2.546 in |
| Finished Bore | N/A |
| Belt Width | 2 in |
| Belt Pitch | 1/2 in |
| Weight | 1.9 LB |
| EAN or UPC | 697950083148 |
