Find a Service Center
Alternate Products
- 70 mm Inside Diameter
- 125 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Seal Material | Metal |
| Dynamic Load Rating | 69000 N |
| Corner Radius [Min] | 1.5 mm |
| Precision Level | Standard (ABEC 1) |
| O.D. | 125 mm |
| Static Load Rating [Max] | 66000 N |
| Precision | Standard |
| Closure Type | Double Shielded |
| Limiting Speed - Grease | 5000 rpm |
| Preload Level | None |
| Width | 24.000 mm |
| Locking Device | No Locking Device |
| I.D. | 70 mm |
| Ball Material | Steel |
| Bore Type | Straight |
| Outer Ring Width | 24 mm |
| Inch/Metric | Metric Bore |
| Radial Internal Clearance | Normal |
| Cage Material | Pressed Steel |
| Enclosure | Double Shielded |
| Rows of Balls | Single |
| O.D. Type | Straight |
| Seal Type | Non-Contact Seals |
| Material | Steel |
| Internal Clearance | C3 |
| Snap Ring | No |
| icNumber | 7700357 |
| Limiting Speed - Oil | N/A |
| Contact Angle | 0° |
| Series | BL2 |
| Bearing Type | Radial and Deep Groove |
| Cage Type | Metal |
| Capacity | Maximum Capacity |
| Radial Internal Clearance Specification | Normal Clearance |
| Weight | 2.535 LB |
| EAN or UPC | 29176032264 |
