Find a Service Center
Alternate Products
- 70 mm Inside Diameter
- 125 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Outer Ring Width | 24 mm |
| Precision | Standard |
| Static Load Rating [Max] | 66000 N |
| Radial Internal Clearance | Normal |
| Capacity | Maximum Capacity |
| Seal Material | Metal |
| Ball Material | Steel |
| Bore Type | Straight |
| Dynamic Load Rating | 69000 N |
| Contact Angle | 0° |
| Material | Steel |
| Rows of Balls | Single |
| Radial Internal Clearance Specification | Normal Clearance |
| icNumber | 7700357 |
| Series | BL2 |
| Bearing Type | Radial and Deep Groove |
| Snap Ring | No |
| O.D. | 125 mm |
| Precision Level | Standard (ABEC 1) |
| Locking Device | No Locking Device |
| Preload Level | None |
| Inch/Metric | Metric Bore |
| Limiting Speed - Grease | 5000 rpm |
| Closure Type | Double Shielded |
| I.D. | 70 mm |
| Enclosure | Double Shielded |
| Cage Type | Metal |
| Width | 24.000 mm |
| Internal Clearance | C3 |
| Limiting Speed - Oil | N/A |
| Corner Radius [Min] | 1.5 mm |
| O.D. Type | Straight |
| Seal Type | Non-Contact Seals |
| Cage Material | Pressed Steel |
| Weight | 2.535 LB |
| EAN or UPC | 29176032264 |
