Find a Service Center
Alternate Products
- 100 mm Inside Diameter
- 180 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Enclosure | Single Shield |
| Contact Angle | 0° |
| Series | BL2 |
| Locking Device | No Locking Device |
| Seal Material | Metal |
| Static Load Rating [Max] | 139000 N |
| Corner Radius [Min] | 2.1 mm |
| Limiting Speed - Grease | 3400 rpm |
| Limiting Speed - Oil | 4000 rpm |
| I.D. | 100 mm |
| Capacity | Maximum Capacity |
| Internal Clearance | C3 |
| Radial Internal Clearance Specification | Normal Clearance |
| Outer Ring Width | 34 mm |
| Precision | Standard |
| Rows of Balls | Single |
| Bore Type | Straight |
| Seal Type | Non-Contact Seals |
| O.D. Type | Straight |
| Cage Type | Metal |
| Cage Material | Pressed Steel |
| Ball Material | Steel |
| Bearing Type | Radial and Deep Groove |
| Precision Level | Standard (ABEC 1) |
| Preload Level | None |
| Dynamic Load Rating | 135000 N |
| Snap Ring | No |
| Width | 34.000 mm |
| icNumber | 7697266 |
| Radial Internal Clearance | Normal |
| Material | Steel |
| O.D. | 180 mm |
| Closure Type | Single Shielded |
| Inch/Metric | Metric Bore |
| Weight | 8.818 LB |
| EAN or UPC | 29176032332 |
