Find a Service Center
Alternate Products
- 100 mm Inside Diameter
- 180 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Enclosure | Single Shield |
| Capacity | Maximum Capacity |
| Width | 34.000 mm |
| Ball Material | Steel |
| Snap Ring | No |
| Internal Clearance | C3 |
| Bearing Type | Radial and Deep Groove |
| Seal Type | Non-Contact Seals |
| Static Load Rating [Max] | 139000 N |
| Contact Angle | 0° |
| Series | BL2 |
| O.D. | 180 mm |
| I.D. | 100 mm |
| Closure Type | Single Shielded |
| Seal Material | Metal |
| Preload Level | None |
| Bore Type | Straight |
| Radial Internal Clearance | Normal |
| Radial Internal Clearance Specification | Normal Clearance |
| Rows of Balls | Single |
| Corner Radius [Min] | 2.1 mm |
| Precision | Standard |
| Material | Steel |
| Limiting Speed - Grease | 3400 rpm |
| Limiting Speed - Oil | 4000 rpm |
| O.D. Type | Straight |
| Inch/Metric | Metric Bore |
| icNumber | 7697266 |
| Cage Type | Metal |
| Dynamic Load Rating | 135000 N |
| Outer Ring Width | 34 mm |
| Cage Material | Pressed Steel |
| Precision Level | Standard (ABEC 1) |
| Locking Device | No Locking Device |
| Weight | 8.818 LB |
| EAN or UPC | 29176032332 |
