Find a Service Center
Alternate Products
- 50 mm Inside Diameter
- 110 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Corner Radius [Min] | 1.1 mm |
| Outer Ring Width | 27 mm |
| Capacity | Maximum Capacity |
| Preload Level | None |
| I.D. | 50 mm |
| Rows of Balls | Single |
| Bearing Type | Radial and Deep Groove |
| Seal Type | Non-Contact Seals |
| Radial Internal Clearance | Normal |
| Seal Material | Metal |
| Internal Clearance | C3 |
| Cage Material | Pressed Steel |
| Dynamic Load Rating | 65000 N |
| Precision | Standard |
| Locking Device | No Locking Device |
| Series | BL3 |
| O.D. Type | Straight |
| Cage Type | Metal |
| Enclosure | Single Shield |
| Closure Type | Double Sealed |
| Ball Material | Steel |
| Inch/Metric | Metric Bore |
| Material | Steel |
| Contact Angle | 0° |
| Static Load Rating [Max] | 52500 N |
| O.D. | 110 mm |
| Width | 27.000 mm |
| icNumber | 7698839 |
| Snap Ring | No |
| Limiting Speed - Oil | 7100 rpm |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance Specification | Normal Clearance |
| Bore Type | Straight |
| Limiting Speed - Grease | 6000 rpm |
| Weight | 2.557 LB |
| EAN or UPC | 29176000164 |
