Find a Service Center
Alternate Products
- 50 mm Inside Diameter
- 110 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| O.D. | 110 mm |
| Snap Ring | No |
| Outer Ring Width | 27 mm |
| Internal Clearance | C3 |
| Limiting Speed - Grease | 6000 rpm |
| Inch/Metric | Metric Bore |
| Static Load Rating [Max] | 52500 N |
| Radial Internal Clearance Specification | Normal Clearance |
| Preload Level | None |
| Bore Type | Straight |
| Ball Material | Steel |
| Rows of Balls | Single |
| Cage Material | Pressed Steel |
| Dynamic Load Rating | 65000 N |
| Locking Device | No Locking Device |
| Contact Angle | 0° |
| Precision | Standard |
| Seal Material | Metal |
| icNumber | 7698839 |
| Width | 27.000 mm |
| Enclosure | Single Shield |
| Closure Type | Double Sealed |
| Limiting Speed - Oil | 7100 rpm |
| Series | BL3 |
| Capacity | Maximum Capacity |
| Bearing Type | Radial and Deep Groove |
| Precision Level | Standard (ABEC 1) |
| O.D. Type | Straight |
| Seal Type | Non-Contact Seals |
| Material | Steel |
| Radial Internal Clearance | Normal |
| Corner Radius [Min] | 1.1 mm |
| I.D. | 50 mm |
| Cage Type | Metal |
| Weight | 2.557 LB |
| EAN or UPC | 29176000164 |
