Precision-ground 1600 series bearings are specially designed to provide a line of low-cost yet high quality bearings for adaptations. They are made in easy-to-use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5,000 rpm. The 1600 series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer or separator is used to increase the range of allowable speeds by reducing ball-to-ball contact friction. The 1600 series radial bearings are available open, single, or doubled shielded, or single or double sealed. Double-sealed and double-shielded bearings are supplied grease packed as standard. Open and single-closure bearings can be supplied greased on request.
features
Improved ball groove finish
Ground bores
Grease packed
Nylon seals
Precision-ground on all contact surfaces
Easy-to-use inch dimensions
Medium loads
Max speed range - 5000 - 6000 rpm
Through-hardened bearing steel
Nylon retainer standard
Greased, double-sealed, or double-shielded standard
Available single sealed or single shielded, open, and with or without grease
Static Load Rating [Max]
2120 lbf
Type
Sealed
Bore Shape
Round
Seal Type
Contact Seals
Seal Material
Rubber
No. in Set
Single Bearing
Total Width
0.625 in, 15.88 mm
Shielded Width
5/8 in
Limiting Speed - Grease
6000 rpm
Outside Ring Width
0.625 in, 15.88 mm
Material
52100 Bearing Quality Steel
Lubricant
General Purpose
Capacity
Standard Capacity
Finish
Chrome Steel
Locking Device
No Locking Device
Fillet Radius
0.035 in, 0.89 mm
Cage Material
Nylon
Inch/Metric
Inch
Ball Material
Steel
Limiting Speed - Oil
6000 rpm
Radial Internal Clearance Specification
Normal Clearance
Preload Level
None
Radial Internal Clearance
Normal
Inside Ring Width
0.625 in, 15.88 mm
I.D.
1.25 in, 31.75 mm
O.D.
2.5 in, 63.5 mm
Internal Clearance
C0
Bore Type
Round Bore
Filling Slot
Single Row Non-Fill Slot
Sealed Width
5/8 in
Bearing Type
Radial
RPM [Max]
5000 rpm
Precision Level
Standard (ABEC 1)
O.D. Type
Straight
Style
Precision Ground, Double Seals
Precision
Standard
Static Load Rating
2120 lbf, 9430 N
Enclosure
Double Sealed
Outside Ring Shape
Straight
Width
5/8 in
Operating Temperature [Min]
-40 ⁰F
Origin
Single Row Radial
Operating Temperature [Max]
284 ⁰F
Limiting Speed
6000 rpm
Inner Ring Width
5/8 in
Contact Angle
0°
Snap Ring
No Snap Ring
Rows of Balls
Single
No. of Rows
Single
Cage Type
Plastic
Series
Nice®
Dynamic Load Rating
3864 lbf
Outer Ring Width
5/8 in
Weight
0.46 LB
EAN or UPC
637400291945
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
