Precision-ground 1600 series bearings are specially designed to provide a line of low-cost yet high quality bearings for adaptations. They are made in easy-to-use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5,000 rpm. The 1600 series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer or separator is used to increase the range of allowable speeds by reducing ball-to-ball contact friction. The 1600 series radial bearings are available open, single, or doubled shielded, or single or double sealed. Double-sealed and double-shielded bearings are supplied grease packed as standard. Open and single-closure bearings can be supplied greased on request.
features
Improved ball groove finish
Ground bores
Grease packed
Nylon seals
Precision-ground on all contact surfaces
Easy-to-use inch dimensions
Medium loads
Max speed range - 5000 - 6000 rpm
Through-hardened bearing steel
Nylon retainer standard
Greased, double-sealed, or double-shielded standard
Available single sealed or single shielded, open, and with or without grease
Bore Type
Round Bore
Limiting Speed
6000 rpm
RPM [Max]
5000 rpm
Outside Ring Width
0.625 in, 15.88 mm
Filling Slot
Single Row Non-Fill Slot
Radial Internal Clearance Specification
Normal Clearance
Bore Shape
Round
Precision Level
Standard (ABEC 1)
Style
Precision Ground, Double Seals
Fillet Radius
0.035 in, 0.89 mm
Origin
Single Row Radial
Material
52100 Bearing Quality Steel
I.D.
1.25 in, 31.75 mm
Locking Device
No Locking Device
Sealed Width
5/8 in
Type
Sealed
Dynamic Load Rating
3864 lbf
Inch/Metric
Inch
Width
5/8 in
Ball Material
Steel
Enclosure
Double Sealed
Outside Ring Shape
Straight
No. in Set
Single Bearing
Limiting Speed - Grease
6000 rpm
Snap Ring
No Snap Ring
Static Load Rating
2120 lbf, 9430 N
Internal Clearance
C0
Operating Temperature [Min]
-40 ⁰F
Limiting Speed - Oil
6000 rpm
O.D. Type
Straight
Lubricant
General Purpose
Shielded Width
5/8 in
Operating Temperature [Max]
284 ⁰F
Preload Level
None
O.D.
2.5 in, 63.5 mm
Inner Ring Width
5/8 in
Inside Ring Width
0.625 in, 15.88 mm
Outer Ring Width
5/8 in
Radial Internal Clearance
Normal
Cage Material
Nylon
Finish
Chrome Steel
Seal Material
Rubber
Bearing Type
Radial
Rows of Balls
Single
Cage Type
Plastic
Series
Nice®
Capacity
Standard Capacity
Seal Type
Contact Seals
Total Width
0.625 in, 15.88 mm
Precision
Standard
Contact Angle
0°
Static Load Rating [Max]
2120 lbf
No. of Rows
Single
Weight
0.46 LB
EAN or UPC
637400291945
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
