Find a Service Center
Boston Gear
F713-40-B5-G
700 Series 40:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #102133809
- 0.25 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Box Length | 4 1/4 in |
| Series | 700 |
| Output Speed | 43.8 rpm |
| Torque Out @ 1750 rpm | 307 in lb |
| Max. Thrust Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Output Torque @ RPM | 307 in lb @ 1750 rpm, 265 in lb @ 1150 rpm |
| Base to Centerline of Output Shaft | 1.72 in |
| Washdown Duty | No |
| Base | No |
| Lubrication | None |
| Standard | AGMA Service Class II |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| HP @ RPM | 0.1666667 hp @ 1800 rpm, 0.1666667 hp @ 1200 rpm |
| Motor Frame Size | B556C |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Input HP @ RPM | 0.31 hp @ 1750 rpm, 0.18 hp @ 1150 rpm |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Material | Cast Iron, Standard Paint |
| Bolt Pattern | 3.25 x 2 |
| Base Mounting Attachment | No Base |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Reduction Type | Single |
| Bolt Center | 3 1/4" x 2" |
| Input Configuration | C-Face Quilled |
| Style | Right Angle |
| Input Motor HP | 0.25 |
| Shaft Assembly Code | G |
| Center Distance Code | 713 |
| Input (Shaft or Bore) Size | 5/8 in |
| Output Configuration | Left Output |
| Use With | 713 |
| Media Mapping Style | F |
| Output Bore Shaft Dia. | 0.625 in |
| Worm Position | Universal |
| Output Shaft Projection | Solid Left Output |
| Motor Application | General Purpose |
| Output Shaft | Solid |
| Input Power Rating | 0.31 hp, 0.231 kW |
| Max. Overhung Load @ RPM | 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Media Mapping Output | G |
| Output RPM @ 1750 rpm Input | 44 rpm |
| Fan Cooled | No |
| Center Distance | 1.33 in |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Housing Material | Cast Iron |
| Ratio | 40:1 |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Output Torque | 307 lb-in |
| Bore Code | B5 |
| Frame Size | 56C |
| Box Height | 4 21/32 in |
| Box Width | 4.03 in |
| Rated Efficiency | 69% |
| Torque Out @ 1150 rpm | 265 in lb |
| Output (Shaft or Bore) Size | 5/8 in |
| Family Name | F |
| Frame | 56C |
| Weight | 13.1 LB |
| EAN or UPC | 781711518885 |
