Find a Service Center
Boston Gear
F713-40-B5-G
700 Series 40:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #102133809
- 0.25 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Center | 3 1/4" x 2" |
| Input Configuration | C-Face Quilled |
| Box Length | 4 1/4 in |
| Frame Size | 56C |
| Worm Position | Universal |
| Torque Out @ 1750 rpm | 307 in lb |
| Base | No |
| Style | Right Angle |
| Center Distance Code | 713 |
| Output Speed | 43.8 rpm |
| Output Bore Shaft Dia. | 0.625 in |
| Motor Application | General Purpose |
| Input Power Rating | 0.31 hp, 0.231 kW |
| Max. Overhung Load @ RPM | 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Center Distance | 1.33 in |
| Output Shaft Projection | Solid Left Output |
| Bolt Pattern | 3.25 x 2 |
| Family Name | F |
| HP @ RPM | 0.1666667 hp @ 1800 rpm, 0.1666667 hp @ 1200 rpm |
| Use With | 713 |
| Standard | AGMA Service Class II |
| Fan Cooled | No |
| Washdown Duty | No |
| Output Configuration | Left Output |
| Output Torque @ RPM | 307 in lb @ 1750 rpm, 265 in lb @ 1150 rpm |
| Motor Frame Size | B556C |
| Bore Code | B5 |
| Box Height | 4 21/32 in |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Output RPM @ 1750 rpm Input | 44 rpm |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Shaft Assembly Code | G |
| Max. Thrust Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Output (Shaft or Bore) Size | 5/8 in |
| Rated Efficiency | 69% |
| Housing Material | Cast Iron |
| Reduction Type | Single |
| Ratio | 40:1 |
| Base Mounting Attachment | No Base |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Input (Shaft or Bore) Size | 5/8 in |
| Series | 700 |
| Media Mapping Output | G |
| Torque Out @ 1150 rpm | 265 in lb |
| Material | Cast Iron, Standard Paint |
| Input HP @ RPM | 0.31 hp @ 1750 rpm, 0.18 hp @ 1150 rpm |
| Base to Centerline of Output Shaft | 1.72 in |
| Output Torque | 307 lb-in |
| Media Mapping Style | F |
| Frame | 56C |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Lubrication | None |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Box Width | 4.03 in |
| Output Shaft | Solid |
| Input Motor HP | 0.25 |
| Weight | 13.1 LB |
| EAN or UPC | 781711518885 |
