Find a Service Center
Boston Gear
F715-40-B5-J
700 Series 40:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835991
- 0.33 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque @ RPM | 380 in lb @ 1150 rpm, 441 in lb @ 1750 rpm |
| Base | No |
| Box Length | 5 1/8 in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Media Mapping Style | F |
| Rated Efficiency | 71% |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Standard | AGMA Service Class II |
| Center Distance Code | 715 |
| Fan Cooled | No |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Input Power Rating | 0.43 hp, 0.321 kW |
| Motor HP | 0.3333 hp |
| Base Mounting Attachment | No Base |
| Torque Out @ 1150 rpm | 380 in lb |
| Output Bore Shaft Dia. | 0.75 in |
| Torque Out @ 1750 rpm | 441 in lb |
| Output Speed | 43.8 rpm |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Media Mapping Output | J |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Series | 700 |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Frame | 56C |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Input HP @ RPM | 0.24 hp @ 1150 rpm, 0.43 hp @ 1750 rpm |
| Output Shaft Projection | Solid Right Output |
| Shaft Assembly Code | J |
| Washdown Duty | No |
| Max. Input HP @ 100 rpm | 0.036 hp |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Base to Centerline of Output Shaft | 1.91 in |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Motor Frame Size | B556C |
| Lubrication | None |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Output (Shaft or Bore) Size | 3/4 in |
| Center Distance | 1.54 in |
| Input Motor HP | 0.33 |
| Reduction Type | Single |
| Frame Size | 56C |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Use With | 715 |
| Input (Shaft or Bore) Size | 5/8 in |
| Worm Position | Universal |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Material | Cast Iron, Standard Paint |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Output Torque | 442 lb-in |
| Keyway Size | 3/16 x 3/32 |
| Motor Application | General Purpose |
| Housing Material | Cast Iron |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Box Height | 5 3/8 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Ratio | 40:1 |
| Output Configuration | Right Output |
| Bore Code | B5 |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Input Configuration | C-Face Quilled |
| Output Shaft | Solid |
| Family Name | F |
| Box Width | 5 1/16 in |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Style | Right Angle |
| Weight | 17.1 LB |
| EAN or UPC | 781711519172 |
