Find a Service Center
Boston Gear
F715-40-B5-J
700 Series 40:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835991
- 0.33 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Base Mounting Attachment | No Base |
| Reduction Type | Single |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Base to Centerline of Output Shaft | 1.91 in |
| Max. Input HP @ 100 rpm | 0.036 hp |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Worm Position | Universal |
| Output Shaft Projection | Solid Right Output |
| Lubrication | None |
| Input (Shaft or Bore) Size | 5/8 in |
| Rated Efficiency | 71% |
| Motor HP | 0.3333 hp |
| Keyway Size | 3/16 x 3/32 |
| Output Torque | 442 lb-in |
| Motor Frame Size | B556C |
| Motor Application | General Purpose |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Material | Cast Iron, Standard Paint |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Family Name | F |
| Box Height | 5 3/8 in |
| Output Shaft | Solid |
| Input Configuration | C-Face Quilled |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Media Mapping Output | J |
| Bore Code | B5 |
| Use With | 715 |
| Base | No |
| Output Torque @ RPM | 380 in lb @ 1150 rpm, 441 in lb @ 1750 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Torque Out @ 1150 rpm | 380 in lb |
| Series | 700 |
| Ratio | 40:1 |
| Output (Shaft or Bore) Size | 3/4 in |
| Standard | AGMA Service Class II |
| Input Power Rating | 0.43 hp, 0.321 kW |
| Torque Out @ 1750 rpm | 441 in lb |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Center Distance | 1.54 in |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Style | Right Angle |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Media Mapping Style | F |
| Box Width | 5 1/16 in |
| Input Motor HP | 0.33 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Input HP @ RPM | 0.24 hp @ 1150 rpm, 0.43 hp @ 1750 rpm |
| Housing Material | Cast Iron |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Shaft Assembly Code | J |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Output Bore Shaft Dia. | 0.75 in |
| Center Distance Code | 715 |
| Output Speed | 43.8 rpm |
| Fan Cooled | No |
| Output Configuration | Right Output |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Box Length | 5 1/8 in |
| Frame | 56C |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Frame Size | 56C |
| Washdown Duty | No |
| Weight | 17.1 LB |
| EAN or UPC | 781711519172 |
