Find a Service Center
Boston Gear
F718-60-B5-H
700 Series 60:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101833973
- 0.33 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Input Configuration | C-Face Quilled |
| Output Configuration | Left & Right Output |
| Output Shaft Projection | Solid Double Projecting Output |
| Base Mounting Attachment | No Base |
| Washdown Duty | No |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Motor Frame Size | B556C |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Center Distance Code | 718 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Motor Application | General Purpose |
| Max. Input HP @ 100 rpm | 0.03 hp |
| Box Width | 5 1/32 in |
| Media Mapping Output | H |
| Ratio | 60:1 |
| Housing Material | Cast Iron |
| Reduction Type | Single |
| Lubrication | None |
| Torque Out @ 1150 rpm | 440 in lb |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Output Shaft | Solid |
| Use With | 718 |
| Input (Shaft or Bore) Size | 5/8 in |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Worm Position | Universal |
| Center Distance | 1.75 in |
| Box Height | 5 3/4 in |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Input HP @ RPM | 0.21 hp @ 1150 rpm, 0.35 hp @ 1750 rpm |
| Shaft Assembly Code | H |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Standard | AGMA Service Class I |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Fan Cooled | No |
| Motor HP | 0.3333 hp |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Output (Shaft or Bore) Size | 7/8 in |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Keyway Size | 3/16 x 3/32 |
| Output Bore Shaft Dia. | 0.875 in |
| Frame Size | 56C |
| Input Motor HP | 0.33 |
| Output RPM @ 1750 rpm Input | 29.2 rpm |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.25 hp @ 1800 rpm |
| Output Torque @ RPM | 440 in lb @ 1150 rpm, 527 in lb @ 1750 rpm |
| Rated Efficiency | 70% |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Torque Out @ 1750 rpm | 527 in lb |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Series | 700 |
| Family Name | F |
| Media Mapping Style | F |
| Style | Right Angle |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bore Code | B5 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Box Length | 5 1/2 in |
| Base | No |
| Output Torque | 527 lb-in |
| Input Power Rating | 0.35 hp, 0.261 kW |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Frame | 56C |
| Material | Cast Iron, Standard Paint |
| Output Speed | 29.2 rpm |
| Weight | 19.1 LB |
| EAN or UPC | 781711519493 |
