Find a Service Center
Boston Gear
F718-60-B5-H
700 Series 60:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101833973
- 0.33 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Worm Position | Universal |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Base Mounting Attachment | No Base |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Motor Frame Size | B556C |
| Rated Efficiency | 70% |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Use With | 718 |
| Output Speed | 29.2 rpm |
| Output Bore Shaft Dia. | 0.875 in |
| Material | Cast Iron, Standard Paint |
| Family Name | F |
| Motor HP | 0.3333 hp |
| Torque Out @ 1150 rpm | 440 in lb |
| Bore Code | B5 |
| Standard | AGMA Service Class I |
| Ratio | 60:1 |
| Box Height | 5 3/4 in |
| Housing Material | Cast Iron |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Output RPM @ 1750 rpm Input | 29.2 rpm |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Washdown Duty | No |
| Fan Cooled | No |
| Input (Shaft or Bore) Size | 5/8 in |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Reduction Type | Single |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Output Shaft Projection | Solid Double Projecting Output |
| Series | 700 |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Box Width | 5 1/32 in |
| Output Shaft | Solid |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Input Power Rating | 0.35 hp, 0.261 kW |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Input HP @ RPM | 0.21 hp @ 1150 rpm, 0.35 hp @ 1750 rpm |
| Center Distance Code | 718 |
| Center Distance | 1.75 in |
| Output Torque @ RPM | 440 in lb @ 1150 rpm, 527 in lb @ 1750 rpm |
| Lubrication | None |
| Media Mapping Style | F |
| Input Configuration | C-Face Quilled |
| Base | No |
| Frame | 56C |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Output (Shaft or Bore) Size | 7/8 in |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Media Mapping Output | H |
| Keyway Size | 3/16 x 3/32 |
| Output Torque | 527 lb-in |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Torque Out @ 1750 rpm | 527 in lb |
| Style | Right Angle |
| Frame Size | 56C |
| Output Configuration | Left & Right Output |
| Input Motor HP | 0.33 |
| Shaft Assembly Code | H |
| Box Length | 5 1/2 in |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.25 hp @ 1800 rpm |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Motor Application | General Purpose |
| Max. Input HP @ 100 rpm | 0.03 hp |
| Weight | 19.1 LB |
| EAN or UPC | 781711519493 |
