Find a Service Center
Boston Gear
F724-40-B5-G
700 Series 40:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809117
- 1 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input (Shaft or Bore) Size | 5/8 in |
| Lubrication | None |
| Max. Input HP @ 100 rpm | 0.11 hp |
| Torque Out @ 1150 rpm | 1160 in lb |
| Shaft Assembly Code | G |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Worm Position | Universal |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Material | Cast Iron, Standard Paint |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Media Mapping Output | G |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Series | 700 |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Box Length | 6 3/8 in |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Bore Code | B5 |
| Frame Size | 56C |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Motor HP | 3/4 hp |
| Use With | 724 |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Input HP @ RPM | 0.7 hp @ 1150 rpm, 1.08 hp @ 1750 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Motor Application | General Purpose |
| Center Distance | 2.375 in |
| Bolt Center | 5 in x 2 7/8 in |
| Output Shaft | Solid |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Rated Efficiency | 77% |
| Box Height | 6 15/16 in |
| Fan Cooled | No |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Ratio | 40:1 |
| Output Torque @ RPM | 1160 in lb @ 1150 rpm, 1206 in lb @ 1750 rpm |
| Frame | 56C |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Style | Right Angle |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Output Shaft Projection | Solid Left Output |
| Box Width | 5 7/16 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Housing Material | Cast Iron |
| Input Motor HP | 1 |
| Input Power Rating | 1.08 hp, 0.805 kW |
| Reduction Type | Single |
| Base Mounting Attachment | No Base |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Center Distance Code | 724 |
| Media Mapping Style | F |
| Motor Frame Size | B556C |
| Output Configuration | Left Output |
| Input Configuration | C-Face Quilled |
| Family Name | F |
| Standard | AGMA Service Class I |
| Output Torque | 1206 lb-in |
| Torque Out @ 1750 rpm | 1206 in lb |
| Output Bore Shaft Dia. | 1.125 in |
| Output Speed | 43.8 rpm |
| Washdown Duty | No |
| Weight | 30.1 LB |
| EAN or UPC | 781711520055 |
| NSN Number | 3010-01-304-0750 |
