Find a Service Center
Boston Gear
F724-40-B5-G
700 Series 40:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809117
- 1 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque @ RPM | 1160 in lb @ 1150 rpm, 1206 in lb @ 1750 rpm |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Frame Size | 56C |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Torque Out @ 1750 rpm | 1206 in lb |
| Output Configuration | Left Output |
| Box Height | 6 15/16 in |
| Media Mapping Style | F |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Output Shaft Projection | Solid Left Output |
| Lubrication | None |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Input Configuration | C-Face Quilled |
| Style | Right Angle |
| Output Bore Shaft Dia. | 1.125 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Rated Efficiency | 77% |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Ratio | 40:1 |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Shaft Assembly Code | G |
| Series | 700 |
| Motor Frame Size | B556C |
| Input HP @ RPM | 0.7 hp @ 1150 rpm, 1.08 hp @ 1750 rpm |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Motor Application | General Purpose |
| Standard | AGMA Service Class I |
| Motor HP | 3/4 hp |
| Family Name | F |
| Box Length | 6 3/8 in |
| Output Shaft | Solid |
| Input Power Rating | 1.08 hp, 0.805 kW |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Output Speed | 43.8 rpm |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Worm Position | Universal |
| Housing Material | Cast Iron |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.11 hp |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Washdown Duty | No |
| Media Mapping Output | G |
| Material | Cast Iron, Standard Paint |
| Torque Out @ 1150 rpm | 1160 in lb |
| Fan Cooled | No |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Reduction Type | Single |
| Bolt Center | 5 in x 2 7/8 in |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Center Distance | 2.375 in |
| Output Torque | 1206 lb-in |
| Box Width | 5 7/16 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Use With | 724 |
| Frame | 56C |
| Center Distance Code | 724 |
| Bore Code | B5 |
| Input Motor HP | 1 |
| Base Mounting Attachment | No Base |
| Weight | 30.1 LB |
| EAN or UPC | 781711520055 |
| NSN Number | 3010-01-304-0750 |
