Find a Service Center
Boston Gear
F732-40F-B7-H
700 Series 40:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101870986
- 2 Input Motor hp
- 700 Series
- 3.25 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Base to Centerline of Output Shaft | 3 1/2 in |
| Max. Overhung Load @ 1750 rpm | 1300 lb/in |
| Input Configuration | C-Face Quilled |
| Rated Efficiency | 78% |
| Box Height | 9 3/8 in |
| Reduction Type | Single |
| Bore Code | B7 |
| Max. Input HP @ 100 rpm | 0.25 hp |
| Input HP @ RPM | 1.75 hp @ 1150 rpm, 2.62 hp @ 1750 rpm |
| Keyway Size | 3/16 x 3/32 |
| Frame Size | 140TC, 180C |
| Motor Frame Size | B7140TC180C |
| Base to Shaft Center Height w/Low Vert. Base Kit | 4.69 in |
| Output (Shaft or Bore) Size | 1 3/8 in |
| Style | Right Angle |
| Motor HP | 2 hp |
| Lubrication | None |
| Output Speed | 43.8 rpm |
| Output Torque | 2944 lb-in |
| Motor Application | General Purpose |
| Output Bore Shaft Dia. | 1.375 in |
| Input Power Rating | 2.62 hp, 1.954 kW |
| Housing Material | Cast Iron |
| Worm Position | Universal |
| Standard | AGMA Service Class II |
| Box Width | 7 9/16 in |
| Max. Thrust Load @ 1150 rpm | 1100 lb/in |
| Max. Overhung Load @ RPM | 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 9 1/2 x 6 1/8 |
| Family Name | F |
| Series | 700 |
| Base to Shaft Center Height w/High Vert. Base Kit | 6 1/4 in |
| Use With | 732 |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Output Torque Rating Range [Min] | 2500 lb-in, 310 Nm |
| Base to Shaft Center Height w/Std. Base Kit | 6 3/4 in |
| Output Torque @ RPM | 2944 in lb @ 1750 rpm, 3000 in lb @ 1150 rpm |
| Media Mapping Style | F |
| Media Mapping Output | H |
| Frame | 140TC, 180C |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input Motor HP | 2 |
| Material | Cast Iron, Standard Paint |
| Shaft Assembly Code | H |
| Torque Out @ 1150 rpm | 3000 in lb |
| Washdown Duty | No |
| Box Length | 9 in |
| Base Mounting Attachment | No Base |
| Output Shaft | Solid |
| Center Distance | 3.25 in |
| Output Shaft Projection | Solid Double Projecting Output |
| Installed Options | Fan |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Output Configuration | Left & Right Output |
| Bolt Centers w/ Vertical Base Kits (in) | 11.88 x 6.13 |
| HP @ RPM | 2 hp @ 1800 rpm |
| Bolt Center | 7 1/2 in x 4 in |
| Max. Thrust Load @ RPM | 1100 lb/in @ 1150 rpm, 1100 lb/in @ 1750 rpm |
| Center Distance Code | 732 |
| Torque Out @ 1750 rpm | 2944 in lb |
| Ratio | 40:1 |
| Fan Cooled | Yes |
| Base to Centerline of Input Shaft | 6 3/4 in |
| Input (Shaft or Bore) Size | 7/8 in |
| Output Torque Rating Range [Max] | 3499 lb-in, 399 Nm |
| Weight | 66.1 LB |
| EAN or UPC | 781711533611 |
