Find a Service Center
Boston Gear
F732-40F-B7-H
700 Series 40:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101870986
- 2 Input Motor hp
- 700 Series
- 3.25 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Base to Shaft Center Height w/Std. Base Kit | 6 3/4 in |
| Input HP @ RPM | 1.75 hp @ 1150 rpm, 2.62 hp @ 1750 rpm |
| Base to Centerline of Output Shaft | 3 1/2 in |
| Max. Thrust Load @ RPM | 1100 lb/in @ 1150 rpm, 1100 lb/in @ 1750 rpm |
| Box Width | 7 9/16 in |
| Frame | 140TC, 180C |
| Torque Out @ 1150 rpm | 3000 in lb |
| Output Torque Rating Range [Min] | 2500 lb-in, 310 Nm |
| Bore Code | B7 |
| Standard | AGMA Service Class II |
| Rated Efficiency | 78% |
| Base to Shaft Center Height w/Low Vert. Base Kit | 4.69 in |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Fan Cooled | Yes |
| Output Speed | 43.8 rpm |
| Media Mapping Style | F |
| Use With | 732 |
| Bolt Centers w/ Std. Base Kit (in) | 9 1/2 x 6 1/8 |
| Output Configuration | Left & Right Output |
| Family Name | F |
| Motor Application | General Purpose |
| Style | Right Angle |
| Max. Overhung Load @ RPM | 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm |
| Torque Out @ 1750 rpm | 2944 in lb |
| Base to Centerline of Input Shaft | 6 3/4 in |
| Base Mounting Attachment | No Base |
| Output (Shaft or Bore) Size | 1 3/8 in |
| Max. Thrust Load @ 1150 rpm | 1100 lb/in |
| Output Torque @ RPM | 2944 in lb @ 1750 rpm, 3000 in lb @ 1150 rpm |
| Max. Overhung Load @ 1750 rpm | 1300 lb/in |
| Input Motor HP | 2 |
| Series | 700 |
| Housing Material | Cast Iron |
| Output Bore Shaft Dia. | 1.375 in |
| Bolt Center | 7 1/2 in x 4 in |
| Frame Size | 140TC, 180C |
| Installed Options | Fan |
| Shaft Assembly Code | H |
| Output Torque Rating Range [Max] | 3499 lb-in, 399 Nm |
| Base to Shaft Center Height w/High Vert. Base Kit | 6 1/4 in |
| Max. Input HP @ 100 rpm | 0.25 hp |
| Input Power Rating | 2.62 hp, 1.954 kW |
| Center Distance Code | 732 |
| Input (Shaft or Bore) Size | 7/8 in |
| Motor HP | 2 hp |
| Bolt Centers w/ Vertical Base Kits (in) | 11.88 x 6.13 |
| Ratio | 40:1 |
| Media Mapping Output | H |
| Output Shaft | Solid |
| Reduction Type | Single |
| Motor Frame Size | B7140TC180C |
| Output Torque | 2944 lb-in |
| HP @ RPM | 2 hp @ 1800 rpm |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Keyway Size | 3/16 x 3/32 |
| Material | Cast Iron, Standard Paint |
| Output Shaft Projection | Solid Double Projecting Output |
| Lubrication | None |
| Box Length | 9 in |
| Input Configuration | C-Face Quilled |
| Washdown Duty | No |
| Worm Position | Universal |
| Box Height | 9 3/8 in |
| Center Distance | 3.25 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Weight | 66.1 LB |
| EAN or UPC | 781711533611 |
