Find a Service Center
Boston Gear
F7713-10-B5-J
700 Series 10:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #100848240
- 0.75 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Media Mapping Style | F |
| Max. Overhung Load @ RPM | 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm |
| Washdown Duty | No |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Output Torque | 281 lb-in |
| Style | Right Angle |
| Bore Code | B5 |
| Motor HP | 3/4 hp |
| Input (Shaft or Bore) Size | 5/8 in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Standard | AGMA Service Class I |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Input HP @ RPM | 0.86 hp @ 1750 rpm, 0.51 hp @ 1150 rpm |
| Input Motor HP | 0.75 |
| Base Mounting Attachment | No Base |
| Base | No |
| Max. Input HP @ 100 rpm | 0.06 hp |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Series | 700 |
| Motor Application | General Purpose |
| Ratio | 10:1 |
| Input Configuration | C-Face Quilled |
| Output Bore Shaft Dia. | 0.625 in |
| Base to Centerline of Output Shaft | 1.72 in |
| Max. Thrust Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Output Shaft | Solid |
| Frame | 56C |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Rated Efficiency | 91% |
| Bolt Pattern | 3.25 x 2 |
| Frame Size | 56C |
| Media Mapping Output | J |
| Output Configuration | Right Output |
| Material | Cast Iron, Standard Paint |
| Fan Cooled | No |
| Reduction Type | Single |
| Family Name | F |
| Input Power Rating | 0.86 hp, 0.641 kW |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Output Shaft Projection | Solid Right Output |
| Torque Out @ 1150 rpm | 243 in lb |
| Worm Position | Universal |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Output (Shaft or Bore) Size | 5/8 in |
| Output Torque @ RPM | 281 in lb @ 1750 rpm, 243 in lb @ 1150 rpm |
| Housing Material | Cast Iron |
| Center Distance Code | 713 |
| Box Length | 4 1/4 in |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Center Distance | 1.33 in |
| Motor Frame Size | B556C |
| Shaft Assembly Code | J |
| Bolt Center | 3 1/4" x 2" |
| Torque Out @ 1750 rpm | 281 in lb |
| Use With | 713 |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Output Speed | 175 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Box Width | 4.03 in |
| Box Height | 4 21/32 in |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Lubrication | None |
| Weight | 13.1 LB |
| EAN or UPC | 781711518755 |
