Find a Service Center
Boston Gear
F7713-10-B5-J
700 Series 10:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #100848240
- 0.75 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Housing Material | Cast Iron |
| Worm Position | Universal |
| Frame | 56C |
| Max. Overhung Load @ RPM | 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm |
| Box Width | 4.03 in |
| Output Shaft Projection | Solid Right Output |
| Series | 700 |
| Output Shaft | Solid |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Output Configuration | Right Output |
| Washdown Duty | No |
| Torque Out @ 1750 rpm | 281 in lb |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Standard | AGMA Service Class I |
| Ratio | 10:1 |
| Output Speed | 175 rpm |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Style | Right Angle |
| Input Motor HP | 0.75 |
| Bolt Pattern | 3.25 x 2 |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Box Length | 4 1/4 in |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Motor Application | General Purpose |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Output (Shaft or Bore) Size | 5/8 in |
| Box Height | 4 21/32 in |
| Use With | 713 |
| Base | No |
| Input Configuration | C-Face Quilled |
| Max. Thrust Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Output Bore Shaft Dia. | 0.625 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Frame Size | 56C |
| Output Torque | 281 lb-in |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Base Mounting Attachment | No Base |
| Input Power Rating | 0.86 hp, 0.641 kW |
| Fan Cooled | No |
| Max. Input HP @ 100 rpm | 0.06 hp |
| Lubrication | None |
| Base to Centerline of Output Shaft | 1.72 in |
| Media Mapping Style | F |
| Reduction Type | Single |
| Center Distance | 1.33 in |
| Shaft Assembly Code | J |
| Motor HP | 3/4 hp |
| Family Name | F |
| Motor Frame Size | B556C |
| Input (Shaft or Bore) Size | 5/8 in |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Torque Out @ 1150 rpm | 243 in lb |
| Bore Code | B5 |
| Center Distance Code | 713 |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Output Torque @ RPM | 281 in lb @ 1750 rpm, 243 in lb @ 1150 rpm |
| Input HP @ RPM | 0.86 hp @ 1750 rpm, 0.51 hp @ 1150 rpm |
| Media Mapping Output | J |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Bolt Center | 3 1/4" x 2" |
| Rated Efficiency | 91% |
| Material | Cast Iron, Standard Paint |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Weight | 13.1 LB |
| EAN or UPC | 781711518755 |
