Find a Service Center
Boston Gear
F7715-30-B5-H
700 Series 30:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809376
- 0.5 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Rated Efficiency | 76% |
| Media Mapping Style | F |
| Input Motor HP | 0.50 |
| Use With | 715 |
| Box Height | 5 3/8 in |
| Worm Position | Universal |
| Box Length | 5 1/8 in |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Shaft Assembly Code | H |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Family Name | F |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Reduction Type | Single |
| Output (Shaft or Bore) Size | 3/4 in |
| Input HP @ RPM | 0.31 hp @ 1150 rpm, 0.54 hp @ 1750 rpm |
| Bore Code | B5 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Ratio | 30:1 |
| Series | 700 |
| Fan Cooled | No |
| Output Torque @ RPM | 388 in lb @ 1150 rpm, 446 in lb @ 1750 rpm |
| Torque Out @ 1750 rpm | 446 in lb |
| HP @ RPM | 0.25 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Media Mapping Output | H |
| Frame | 56C |
| Torque Out @ 1150 rpm | 388 in lb |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Input (Shaft or Bore) Size | 5/8 in |
| Center Distance Code | 715 |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Standard | AGMA Service Class I |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Max. Input HP @ 100 rpm | 0.04 hp |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Motor Application | General Purpose |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Width | 5 1/16 in |
| Output Configuration | Left & Right Output |
| Housing Material | Cast Iron |
| Frame Size | 56C |
| Style | Right Angle |
| Input Configuration | C-Face Quilled |
| Output Torque | 445 lb-in |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Motor HP | 0.3333 hp |
| Output Speed | 58.3 rpm |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Center Distance | 1.54 in |
| Base to Centerline of Output Shaft | 1.91 in |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Lubrication | None |
| Output Shaft | Solid |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Keyway Size | 3/16 x 3/32 |
| Base Mounting Attachment | No Base |
| Motor Frame Size | B556C |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Material | Cast Iron, Standard Paint |
| Base | No |
| Washdown Duty | No |
| Input Power Rating | 0.54 hp, 0.403 kW |
| Output Shaft Projection | Solid Double Projecting Output |
| Output Bore Shaft Dia. | 0.75 in |
| Weight | 17.1 LB |
| EAN or UPC | 781711519134 |
