Find a Service Center
Boston Gear
F7715-30-B5-H
700 Series 30:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809376
- 0.5 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Base | No |
| Center Distance Code | 715 |
| Torque Out @ 1150 rpm | 388 in lb |
| Motor Application | General Purpose |
| HP @ RPM | 0.25 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Family Name | F |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Base to Centerline of Output Shaft | 1.91 in |
| Input Power Rating | 0.54 hp, 0.403 kW |
| Input Motor HP | 0.50 |
| Output Speed | 58.3 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Washdown Duty | No |
| Output Shaft | Solid |
| Worm Position | Universal |
| Torque Out @ 1750 rpm | 446 in lb |
| Input HP @ RPM | 0.31 hp @ 1150 rpm, 0.54 hp @ 1750 rpm |
| Input (Shaft or Bore) Size | 5/8 in |
| Output Shaft Projection | Solid Double Projecting Output |
| Max. Input HP @ 100 rpm | 0.04 hp |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Frame Size | 56C |
| Shaft Assembly Code | H |
| Base Mounting Attachment | No Base |
| Style | Right Angle |
| Output (Shaft or Bore) Size | 3/4 in |
| Output Torque | 445 lb-in |
| Media Mapping Output | H |
| Box Length | 5 1/8 in |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Fan Cooled | No |
| Output Torque @ RPM | 388 in lb @ 1150 rpm, 446 in lb @ 1750 rpm |
| Frame | 56C |
| Bore Code | B5 |
| Media Mapping Style | F |
| Series | 700 |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Box Width | 5 1/16 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Ratio | 30:1 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Use With | 715 |
| Output Configuration | Left & Right Output |
| Rated Efficiency | 76% |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Housing Material | Cast Iron |
| Lubrication | None |
| Motor HP | 0.3333 hp |
| Material | Cast Iron, Standard Paint |
| Reduction Type | Single |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Input Configuration | C-Face Quilled |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Motor Frame Size | B556C |
| Center Distance | 1.54 in |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Output Bore Shaft Dia. | 0.75 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Box Height | 5 3/8 in |
| Keyway Size | 3/16 x 3/32 |
| Standard | AGMA Service Class I |
| Weight | 17.1 LB |
| EAN or UPC | 781711519134 |
