Find a Service Center
Boston Gear
F7715-40-B5-G
700 Series 40:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805903
- 0.33 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Housing Material | Cast Iron |
| Center Distance | 1.54 in |
| Base to Centerline of Output Shaft | 1.91 in |
| Ratio | 40:1 |
| Input Configuration | C-Face Quilled |
| Max. Input HP @ 100 rpm | 0.036 hp |
| Worm Position | Universal |
| Frame | 56C |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Input (Shaft or Bore) Size | 5/8 in |
| Lubrication | None |
| Output Shaft Projection | Solid Left Output |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Output (Shaft or Bore) Size | 3/4 in |
| Base Mounting Attachment | No Base |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Output Torque | 442 lb-in |
| Output Shaft | Solid |
| Media Mapping Output | G |
| Center Distance Code | 715 |
| Box Length | 5 1/8 in |
| Reduction Type | Single |
| Family Name | F |
| Shaft Assembly Code | G |
| Motor Application | General Purpose |
| Output Configuration | Left Output |
| Style | Right Angle |
| Frame Size | 56C |
| Standard | AGMA Service Class II |
| Use With | 715 |
| Base | No |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Motor HP | 0.3333 hp |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Washdown Duty | No |
| Series | 700 |
| Material | Cast Iron, Standard Paint |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Torque Out @ 1750 rpm | 441 in lb |
| Fan Cooled | No |
| Input HP @ RPM | 0.24 hp @ 1150 rpm, 0.43 hp @ 1750 rpm |
| Bore Code | B5 |
| Torque Out @ 1150 rpm | 380 in lb |
| Box Width | 5 1/16 in |
| Input Motor HP | 0.33 |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Output Bore Shaft Dia. | 0.75 in |
| Output Torque @ RPM | 380 in lb @ 1150 rpm, 441 in lb @ 1750 rpm |
| Rated Efficiency | 71% |
| Output Speed | 43.8 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Box Height | 5 3/8 in |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Motor Frame Size | B556C |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Input Power Rating | 0.43 hp, 0.321 kW |
| Media Mapping Style | F |
| Weight | 17.1 LB |
| EAN or UPC | 781711519158 |
